Steel Grating is available in bar sizes from 20mm to 50 mm. Press-locked Steel Grating incorporates tight fitting, slotted bearings and twisted cross bars locked together under extreme pressure creating a strong, rigid panel with a level surface and easy maintenance. Welded Steel Bar Grating is the most popular of all grating types due to its strength, cost-efficient production and ease of installation. Universally used in most general industrial plants as well as commercial buildings, it has wide applications as walkways, platforms, safety barriers, drainage covers and ventilation grates.
It is also ideal for use as mezzanine decking since it supports the same loads as comparable solid flooring. More than that, its cost saving openness maximizes the circulation of air, light, heat, water and sound, while promoting cleanliness. And, where insurance codes permit, additional sprinklers can often be eliminated. Standard panels are available in widths of 2', 3' or 4'.

Welded steel bar grating is resistance welded to create a rugged, one-piece constructed panel. The bearing bars are automatically resistance welded at the contact point with the cross bars and, under a combination of high heat and pressure, are fused together to form a permanent joint. The cross bars provide a high degree of rigidity, yet retain a smooth flat surface for free and easy walking.
Used in municipal engineering, walkway, park, water & sewage treatment system etc. The entire range has been designed with a view to maximizing the grate open area thus achieving the most hydraulically efficent grates available, it can be manufacture the widest range of sizes for various load requirements.

Light duty bar grating
For walkways.
Loading UDL 300kg/m²
Maintenance Platforms, Catwalks, Conveyor Walkways, Restricted to one-person traffic.
Medium duty walkways Loading UDL 500kg/m²
General Production Platforms, Restricted to regular two-way pedestrian traffic.

Heavy duty
For walkways Loading UDL 750kg/m²
General Production Platforms, High Density Pedestrian Traffic.

Model Description
1) Bearing Bar Specification: 1", 1-1/4" ,1-1/2" x 1/8", 3/16", 1/4" (Height X Thickness)
2) Bearing Bar Spacing:1/2", 3/4",1",1-1/4",1-1/2"etc, also be according to client' s requirement and 3/8",2" are recommended
3) Bearing Bar Surface:Smooth - Standard surface ; Serrated - Serrations are cut into the grating’s bearing bars surface
4) Cross Bar Spacing:1-1/2", 2", 2-1/2", 4" etc, also be according to client’s requirement and 2", 4" are recommended
5) Material: Mild Steel or Stainless Steel
6) Surface Treatment: Untreated, Painting or Hot Dip Galvanizing